White fused alumina electrically fused in arc furnace with high grade processed alumina as raw material. It has higher hardness and slight lower toughness comparing with brown fused alumina. It is also characterized by its high purity, ability of self-sharpening, better cutting, less heat emit, higher efficiency. White fused aluminum oxide becomes the first choice for

Brief introduction of White aluminum oxide   White aluminum oxide was made from the high quality alumina by melting above 2200℃ in the electric arc furnace and cooling. White aluminum oxide is white with the main crystal phase alpha-Al2O3. White aluminum oxide produced in titling electric arc furnace has the advantage of high bulk density and low

White fused alumina electrically fused in arc furnace with high grade processed alumina as raw material. It has higher hardness and slight lower toughness comparing with brown fused alumina. It is also characterized by its high purity, ability of self-sharpening, better cutting, less heat emit, higher efficiency. White fused aluminum oxide becomes the first choice for

Physical and Chemical Composition   Physical Properties Hardness: micro 21600-22600kg/mm3 Hardness: Mohs 9.0 min Specific Gravity 3.95-3.97g/cm3 Bulk Density 1.65-2.05g/cm3 Particle Shape Blocky, Sharp Color white Chemical compositions Al2O3 99.40min SiO2 0.15max Na2O 0.28max Fe2O3 0.06max CaO 0.03max Typical Size   Fraction sand or powder Grit designation Passing rate % 0-1mm 90 1-3mm 90 3-5mm

White aluminum oxide is white with the main crystal phase alpha-Al2O3,it is made from the high quality alumina by melting above 2200℃ in the electric arc furnace and cooling.   White aluminum oxide produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can

AL2O3 alumina polishing powder is a white abrasive made from industrial alumina powder (Al2O3) with a content of over 98% and a small amount of iron oxide and silicon oxide. It is a white abrasive which is melted at high temperature. Its hardness is slightly higher than that of brown corundum and its toughness is slightly